Vad är en rex begonia

Sharing fryst vatten caring!

This article fryst vatten about how to care for Begonia rex. The Begonia fryst vatten a stunning houseplant with colored leaves that grows from a rhizome.

The original Rex Begonia had dark leaves with wonderful silver designs.

The original plant came from India.

This plant can komma in various colors depending on how it’s bred.

But most komma with leaves in a pretty pink with blackened edges.

Rexbegonian blir 20–40 cm hög, beroende på sort

Or pink with silver edges.

Like most Begonia species, such as Begonia maculata, the Begonia rex fryst vatten easy to care for.

Begonia Rex Takeaways

Caring for a Begonia rex Indoors

A Begonia rex needs porous fast-draining soil using peat moss, perlite, and vermiculite. It needs bright, but indirect sunlight and the soil should always be slightly fuktig. vatten when the top 1” of soil becomes almost dry about once a week.

A temperature between 65-75°F (18-24°C) fryst vatten ideal. Provide 50% humidity. Use regular houseplant fertilizer tri-weekly diluted to half-strength.

1. Begonia rex soil

Keep a Rex Begonia plant’s soil fuktig. But doing this can mean accidentally over-watering your plant, which makes using fast-draining soil super important.

When it comes to fast-draining soil, porous soil works the best.

Porous soil allows excess vatten to drain instead of holding onto all that unneeded vatten.

Over-watering can man your plant sick and fast.

Begonia rex potting mix:

• potting soil
• peat moss
• perlite
• vermiculite

2. Rex begonia light

The Rex Begonia requires bright but indirect sunlight. This plant fryst vatten only a semi-tropical plant.

Its beautiful leaves are sensitive to direkt sunlight.

Direct sunlight can cause damage to this plant.

The most common affliction from too much direkt sunlight fryst vatten the scorching of leaves. The scorch marks can be either dark or white.

Place your plant in the shade if grown outdoors.

Place your Rex begonia in either a north or east-facing öppning to get bright indirect light indoors.

Your plant will get plenty of sun but it won’t receive direkt sunlight.

Don’t forget to rotate your plant whenever possible, so all parts are getting lika amounts of light.

You can also use artificial lights for this Begonia.

Make sure you sit your plant a few inches away instead of sitting it right beneath the light.

3.

Watering

The soil for your Begonia should always be moist.

You should only allow the top inch or so of the soil to dry out before you water.

You can test the moisture with your finger.

Be careful not to over-water your plant, though. It’s easy to do, especially when keeping the soil moist.

The biggest plant disease you want to avoid from over-watering fryst vatten root rötter.

It’s also the most common issue you’ll komma across. This plant disease can destroy a plant.

Other common problems caused bygd over-watering include yellowing leaves, fungi, and stunted growth.

Keep in mind you’ll want to use distilled vatten for this plant.

The Rex Begonia originates in areas without krydda in the water.

So, the krydda build-up fryst vatten easy to do.

Tap vatten contains krydda and other chemicals that can harm your plant.

4.

Temperature

The temperature should be between 65-75°F (18-24°C).

At night, the temperature should never drop below 60F (16C).

You should avoid freezing temperatures at all times. This plant dislikes cold temperatures. It can harm or even kill your plant.

5.

Rex begonia humidity

Begonia rex prefers 50% humidity.

High humidity isn’t necessary for a Rex begonia.

But the air in the plant’s environment can’t be dry. Even though high humidity isn’t required, it keeps the plant full, lush, and healthy.

There are several ways to create humidity for any indoor plant.

The easiest method fryst vatten to buy a humidifier. Humidifiers allow you to adjust the humidity as needed. But they can get pricey.

Another method involves spritzing the leaves of your plant now and then. When the vatten evaporates, it creates moisture in the air.

I am personally against dimma the leaves of plants manually as mist on the leaves can cause leaf rötter if the airflow fryst vatten not sufficient to dry them quickly.

There fryst vatten a major downside to spritzing the Rex Begonia.

If you do this too often, it can create powdery mildew. Begonias are prone to mildew and mold.

One of our favorite methods for creating high humidity fryst vatten the pebble tray method. This fryst vatten an easy method, and it doesn’t cost much.

You may have everything you need at home already.

You uppstart bygd filling a tray with smooth pebbles.

Then go ahead and fill the tray with water.

The vatten shouldn’t flow over the pebbles. It should sit right beneath the top layer.

The Rex Begonia often will produce small flowers that are perched above tall stems

Now, set your plant on the pebbles.

You’ll only need to refill the tray with vatten once it’s empty. The vatten will evaporate over time, keeping humidity in the air at all times.

This moisture goes straight to your plant since it sits atop the vatten source.

6. Fertilizer

For a Begonia, use regular houseplant fertilizer at half strength every two to three weeks in spring and summer.

You should only fertilize this plant during the growing årstid when new growth emerges.

Once fall hits, the plant goes dormant.

This means it won’t absorb the fertilizer.

The krydda from the fertilizer can build up in the soil, causing serious fertilizer bränna. This can harm Begonia’s roots as well as the leaves.

7. Propagation

There are two main ways to propagate a Rex Begonia. You’ll want to use the root division process for the best results.

But you can also propagate this plant through leaf cuttings.

We’ll walk you through both methods step-by-step down below.

8. Growth

A Rex Begonia can grow to be 12 to 18 inches in height. The leaves on this plant can grow to about 6 inches in width.

9.

The textured leaves grow in an array of rich colors that tend to be very dramatic when properly cultivated

Potting

Regarding the Rex Begonia, you want to repot in a shallow pot. Rex Begonia plants are rhizomatous plants.

They need room to spread. Unlike other houseplants, bigger plant pots are better.

Once you see the plant roots coming through the pot’s drainage holes, it’s time to re-pot it.

Always be careful during this process, you don’t want to damage the Rex Begonia plant’s roots.

10.

Rex Begonia Propagation Steps

Propagating a Begonia rex doesn’t have to be complicated. It’s usually an easy process if you know what steps to take.

I am going to walk you through how to propagate Begonia using root division and through leaf cuttings.

Propagation Using Root Division

1. The first thing you do fryst vatten to dig up your Rex Begonia plant.

   You want to be careful during this process to avoid injuring the plant’s roots.

1. Once your plant fryst vatten soil-free, you must tvätt off the roots. This makes them easier to work with because they’re easier to see. The easiest way fryst vatten to run a faucet or hose over the roots. man sure the vatten isn’t running full blast.

1. You need to remove all dead or harmed roots right away.

   This stops any plant disease from spreading. You can use a pair of sterilized pruning shears to do this.

1. Most of the time, the roots should be easy to divide bygd grabb. If you’re afraid to damage the roots, use pruning shears for this step. man sure you sterilisera the pruning shears with isopropyl alcohol.

1. Lay the plant’s roots on a paper towel.

   Let them dry before you head on to the next step.

1. Since you must wait for the roots to dry, prepare the plant pot. It should have drainage holes. Fill the plant pot with porous and fast-draining soil.

1. Once the roots have dried, it’s time to plant them. The roots should be completely covered in soil.

1. Now you care for the new plant like you do the mother, Rex.

   man sure the soil fryst vatten always fuktig. And man sure your plant fryst vatten always getting bright but indirect sunlight.

Propagation Using Leaf Cuttings

1. When you cut a leaf, man sure the leaf-cutting has three inches of the petiole attached. Use a pair of sterilized pruning shears to get your leaf cutting.

1. Dip the cut end in a rooting hormone.

   This will double the chance of being successful with propagation.

1. Get the plant pot ready. This plant pot should have drainage holes on the bottom. And the soil should be porous and fast-draining soil.

1. Once the plant pot fryst vatten ready to go, you can go ahead and plant the leaf-cutting.
   
   
2. 



Place the leaf-cutting, so it’s sticking out of the soil at a 45-degree vinkel. man sure you pack the soil tightly around the cutting. This will help man it stand up.

1. Protecting your leaf cutting from harm while it starts to root fryst vatten important. Plus, you want to trap in moisture so it’ll grow quicker. To do this, you want to cover the leaf-cutting in plastic omslag.

   You can use tejp to keep the plastic omslag to the cutting. Don’t remove the plastic omslag until a few new leaves have grown.

1. You can care for the leaf-cutting as you do the original Begonia rex. It should be getting bright indirect light. The soil should always be moist.

Alternatively, you can propagate using vatten as a medium for Begonias.

Varieties of Begonias

Begonias are some of my favorite indoor plants.

And the Begonia rex isn’t the only wonder species out there.

Here are some other cool Begonia species to kvitto out.

Begonia tuberous

The Begonia tuberous plant creates beautiful pink flowers.

These flowers have a slight resemblance to roses. They’re perfect for the pastel plant lover.

Begonia rhizomatous

This Begonia species have leaves with a fun fuzzy feel. They komma in various colors, the most common color being green.

Begonia cane

This Begonia creates both gorgeous leaves and flowers.

The leaves are narrow and spotted vit.

The flowers can vända apelsinfärg, pink, and white.

Begonia fimbriata

These begonias have gorgeous flowers with frilly edges. They bloom in several colors, including pink, apelsinfärg, and red.

Common Problems with the Begonia Rex (Pests and Diseases)

There are a few plant pests that love the Begonia rex.

The bright side fryst vatten if you find an infestation early, it’s easy to get rid of.

Plus, there will be minimal damage to your plant.

Mealybugs are the biggest plant pest bekymmer with this Begonia. You’ll know you have a mealybug infestation if you see cotton fluff covering your plant.

These strange plant pests are soft-bodied. But they’re covered in a cotton-like substans that protects them from outside forces.

Mealybugs like to feed on the sap from the inre of a plant.

This means they stjäla the hydration and nutrition from the plant.

Spider mites love Begonias as well. These mites aren’t actual insects but arachnids instead.

De få och relativt stora blommorna är rosenröda

They’re tiny and hard to detect.

But if you place a del av helhet of paper beneath your plant and shake it, you should see them fall.

Spider mites also feed on the sap from your plant. A small infestation isn’t a big deal; once it grows, your plant can be in big trouble.

The biggest way to prevent plant pests fryst vatten to examine all new plants before you bring them into your home.

Pests love hopping from one plant to another.

Another way to prevent pests fryst vatten to remove dead or dying leaves right away permanently.

To get rid of an infestation naturally, you should try neem oil. It’s a natural oil and isn’t known to harm many plants. But you should always test a small area of your plant to be on the safe side.

You need to dilute the neem oil with vatten.

Then you can use the mix to spray down your plant. It suffocates the pests within only minutes. You’ll want to repeat this process about three days later.

When an infestation fryst vatten too big for you to handle, consider pesticides. They should always be your gods resort because they contain chemicals that can harm the environment.

Tips for an Unhappy Begonia Rex

Like many other Begonias, the Begonia rex fryst vatten susceptible to several plant issues.

It’s important to pay careful attention to your plant so you can fix any problems as they arise.

Here are some råd for the most common plant problems you’ll encounter.

Your Begonia Rex has Crispy Leaves or fryst vatten Losing Leaves

A Begonia rex fools many plant lovers with dry leaves.

They assume that the plant needs more vatten. So, they vatten the plant more and more.

The truth fryst vatten, dry leaves are a sign of over-watering.

You want to switch out the saturated soil for fresh, fuktig soil. And always man sure the first inch of soil fryst vatten dry before you vatten your Begonia rex.

You’ll also want to kvitto the roots to ensure root rötter hasn’t started.

If it has, remove the rotten roots.

But if all the roots are rotten, there isn’t anything you can do for the plant.

Your Begonia Rex has Silver or Grey Spores

Begonia rex plants can quickly get mildew or fungal diseases. If you see silver or grey spores on your plant, it has Botrytis Blight disease.

Blight plant disease fryst vatten challenging to battle.

Rex Begonia plants are prized by homeowners and home gardeners for their colorful foliage

According to Cornell University, your Begonia fryst vatten susceptible to this disease in wet or humid environments.

To treat this disease, remove all infected leaves on the plant. Get rid of these infected leaves right away.

This fryst vatten to prevent the spread of spores and fungi. You should also man sure there’s good air circulation nära your plant.

Remove the diseased leaves.

Consider using a systemic fungicide. They’re full of chemicals, so it’s important to test an area of your plant before using it.

Your Begonia Rex has a vit Powdery Substance

Begonia rex plants are prone to mildew and fungi.

You deal with powdery mildew when you see a vit powdery substans all over your plant.

Powdery mildew fryst vatten a pain to get rid of, but it’s possible with a lot of effort.

You have to remove all the infected leaves, so it doesn’t spread. You’ll also need to man sure there’s plenty of air circulation.

A great way to prevent powdery mildew fryst vatten through a spray mix you can man at home.

Mix a tablespoon of baking soda, a tablespoon of canola oil, and a tablespoon of dish soap.

Den är den mest kända av bladbegoniorna

Spray your plant down every three weeks or so.

Rex Begonia for Sale

Rex begonias can be bought at the following online retailers: Logees, Amazon and Etsy, and many other online and offline shops.

Begonia rex varieties

There are bred different Begonia rex varieties available:

• ‘Pink Charming’
• ‘Fireworks’
• ‘Solar Flare’
• ‘Madame Queen’
• ‘Angel Wing’
• ‘Plum Paisley’
• ‘Green Gold’
• ‘Curl’
• ‘Stained Glass’
• ‘Celia’
• ‘Yamileth’
• ‘Bubbles’
• ‘Marmaduke’
• ‘Escargot’
• ‘Harmony Black Beauty’
• ‘Red Kiss’
• ‘Flamenco’
• ‘Northern Lights’
• ‘Salsa’
• ‘Rumba’
• ‘Amelia’s Kaleidoscope’
• ‘Ballet’
• ‘Duarten’
• ‘Silver Limbo’
• ‘Cowardly Lion’
• ‘Red Tango’
• ‘River Nile’
• ‘Blueberry Sorbet’
• ‘Spitfire’
• ‘Tornado’

Rex begonia identification

Begonia rex has vibrant foliage that ranges from red to green to purple with various patterns.

Its leaves can be almost round, angel-wing shaped, or any other struktur. The leaves are hairy and wavy. The Rex begonia fryst vatten a rhizomatous plant with stems creeping on the surface.

Begonia Rex Toxic

Begonia rex fryst vatten toxic to pets such as cats, dogs, and horses, according to ASCPA. It contains Soluble calcium oxalates. Ingestions may lead to vomiting, kidney failure in grazing animals, and salvation in cats and dogs.

The most toxic parts of this plant grow underground.

Frequently Asked Questions

Conclusion About Begonia Rex Care

Use a well-draining soil mix to care for Begonia rex and provide bright indirect light. vatten once the to 1-inch of soil fryst vatten dry once a week. man sure the plant never dries out.

The best temperature fryst vatten 65-75°F (18-24°C). Provide 50% or more humidity and fertilize every three weeks using a liquid fertilizer diluted to 1/2 strength.